Our MCB breaking capacity is up to 10-15KA , the DC
voltage for MCB MCCB SPD is up to 1500V.
The new RCBO is a single pole plus switched neutral device where the line/load can be connected from top or bottom. Having no restriction to the connection of supply enhances the safety of your installation and the compact.Single pole size allows more poles to fit into assemblies offering a cost effective solution.
It achieved Australia SAA certificate ,and pass the ESV test ,It is can be wired in either direction
| Electrical | |
| Design according to | IEC61009-1 AS/NZS61009-1 |
| Number of poles | 1P+N |
| Active and neutral poles switched | |
| Rated current In: | 6 – 40A |
| Rated voltage Un | 230/240 Vac |
| Rated frequency | 50/60 Hz |
| Voltage range for protective function | 50 – 253V |
| Rated short circuit capacity | 4.5kA |
| Rated residual making/breaking capacity | 3kA |
| Tripping characteristic | B,C |
| Rated tripping current IΔn | 250A (8/20us) |
| Rated tripping current IΔno | 10, 30mA |
| Residual current sensitivity | AC, A |
| Rated non-tripping current IΔno | 0.5 IΔno |
| Rated Insulation voltage | 500V |
| Dielectric strength | 2.5kV |
| Selectivity class | 3 |
| Operating temperature | -5 to 40ºC |
| Endurance | Electrical comp. >10,000 operating cyclesMechanical comp. >30,000 operating cycles |
| Mounting | 3-Position DIN rail clip, permits removal from existing busbar system |
| Load terminals | Load terminalsOpen mouthed/lift terminals |
| Line terminals | Open mouthed/lift terminals |
| Terminal protection | Finger and hand touch safe |
| Terminal capacity | 1 – 16 mm2 |
| Terminal screw torque | 1.2Nm |
| Degree of protection, switch | IP20 |
| Degree of protection, built-in | IP40 |
| Resistance to climatic conditions | acc. To IEC/EN 61009 |
