Looking for Exclusive Agency and Distributor! Welcome Contact:0086-18966276297 0086-577-61718910
Good Quality Spd - wholesale 3 phase 10-20ka 385V SPD,overvoltage Power surge protection,lightning protection class II+III spd HS2-10 – HONI electric
Good Quality Spd - wholesale 3 phase 10-20ka 385V SPD,overvoltage Power surge protection,lightning protection class II+III spd HS2-10 – HONI electric Detail:
Features/Benefifits
Easy installation or retrofit
Din-rail mountable
Fail-safe /self-protected design
Remote indicator (optional) with 3 pin NO/NC contact
IP20 finger-safe design
Visual indicator
Small foot print
|
Type
|
HS25-D10
|
|
Technical Data Maximum continuous voltage (UC) (L-N) |
275 / 320 / 385 / 420V |
|
Maximum continuous voltage (UC) (N-PE) |
275V |
|
SPD to EN 61643-11 |
Type 3 |
|
SPD to IEC 61643-11 |
class III |
|
Nominal discharge current (8/20μs) (In) |
5kA |
|
Maximum discharge current (8/20μs) (Imax) |
10kA |
|
Voltage protection level (Up) (L-N) |
≤ 1.0 / 1.1/ 1.3 / 1.5kV |
|
Voltage protection level (Up) (N-PE) |
≤ 1.5kV |
|
Response time (tA) (L-N) |
< 25ns |
|
Response time (tA) (N-PE) |
< 100ns |
|
Thermal Protection |
YES |
|
Operating State/Fault Indication |
Green (good) / White or Red (replace) |
|
Degree of protection |
IP 20 |
|
Insulating material / flammability class |
PA66,UL94 V-0 |
|
Temperature range |
-40ºC~+80ºC |
|
Altitude |
13123 ft [4000m] |
|
Conductor Cross Section (max) |
35mm2 (Solid) / 25mm2 (Flexible) |
|
Remote Contacts (RC) |
Optional |
|
Format |
Pluggable |
|
For mounting on |
DIN rail 35mm |
|
Place of installation |
indoor installation |
HS25-D10 is the range of devices for discharging induced transient overvoltages(Type 3 / Class III), in accordance with EN/IEC 61643-11. DIN rail plug-in format.
Ability to discharge induced voltage surges (8/20 μs). For very fine protection of sensitive equipment(1.2/50 μs). Installation downstream of type 2 protection.
■Suitable as the final stage of protection in panels with Type 2 protection devices installed upstream. The residual voltage left downstream is less than for Type 1 or 2.
They should be installed as close as possible to the equipment being protected.
■Discharge capacity with an 8/20 μs waveform. Imax: 10 kA.
■Exclusive devices for TNS, TNC, TT , IT earthing systems.
■Exclusive devices which are compatible with Power Line Communication networks.
■Biconnect – two types of terminal: for rigid or flexible cable and for fork type comb busbar.
■Available with optional remote signalling.
Product detail pictures:
Related Product Guide:
It truly is our responsibility to fulfill your requirements and successfully provide you. Your fulfillment is our best reward. We're seeking forward in your check out for joint development for Good Quality Spd - wholesale 3 phase 10-20ka 385V SPD,overvoltage Power surge protection,lightning protection class II+III spd HS2-10 – HONI electric , The product will supply to all over the world, such as: Greek, Indonesia, Cambodia, Till now, the items list has been updated regularly and attracted clients from around the globe. Comprehensive facts is often obtained in our web-site and you'll be served with premium quality consultant service by our after-sale group. They are likely to help you get thorough acknowledge about our goods and make a satisfied negotiation. Company go to to our factory in Brazil is also welcome at any time. Hope to obtain your inquiries for any pleased co-operation.
By Althea from Malaysia - 2018.11.06 10:04
Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
By trameka milhouse from Hamburg - 2017.04.28 15:45
