High Quality for Spd 24v Dc - wholesale 3 phase 10-20ka 385V SPD,overvoltage Power surge protection,lightning protection class II+III spd HS2-10 – HONI electric

Send email to us

Product Detail

Product Tags

Feedback (2)

"Sincerity, Innovation, Rigorousness, and Efficiency" may be the persistent conception of our organization for that long-term to establish jointly with customers for mutual reciprocity and mutual gain for Spd Rs 485, Hybrid Car Charger Home, 240 Volt Ev Charger, For further information, please do not hesitate to contact us. All inquiries from you will be highly appreciated.

High Quality for Spd 24v Dc - wholesale 3 phase 10-20ka 385V SPD,overvoltage Power surge protection,lightning protection class II+III spd HS2-10 – HONI electric Detail:

Features/Benefifits

Easy installation or retrofit
Din-rail mountable
Fail-safe /self-protected design
Remote indicator (optional) with 3 pin NO/NC contact
IP20 finger-safe design
Visual indicator
Small foot print

Data sheet

Type	HS25-D10
Technical Data Maximum continuous voltage (UC) (L-N)	275 / 320 / 385 / 420V
Maximum continuous voltage (UC) (N-PE)	275V
SPD to EN 61643-11	Type 3
SPD to IEC 61643-11	class III
Nominal discharge current (8/20μs) (In)	5kA
Maximum discharge current (8/20μs) (Imax)	10kA
Voltage protection level (Up) (L-N)	≤ 1.0 / 1.1/ 1.3 / 1.5kV
Voltage protection level (Up) (N-PE)	≤ 1.5kV
Response time (tA) (L-N)	< 25ns
Response time (tA) (N-PE)	< 100ns
Thermal Protection	YES
Operating State/Fault Indication	Green (good) / White or Red (replace)
Degree of protection	IP 20
Insulating material / ﬂammability class	PA66,UL94 V-0
Temperature range	-40ºC~+80ºC
Altitude	13123 ft [4000m]
Conductor Cross Section (max)	35mm2 (Solid) / 25mm2 (Flexible)
Remote Contacts (RC)	Optional
Format	Pluggable
For mounting on	DIN rail 35mm
Place of installation	indoor installation

Plug-in format

HS25-D10 is the range of devices for discharging induced transient overvoltages(Type 3 / Class III), in accordance with EN/IEC 61643-11. DIN rail plug-in format.
Ability to discharge induced voltage surges (8/20 μs). For very fine protection of sensitive equipment(1.2/50 μs). Installation downstream of type 2 protection.
■Suitable as the final stage of protection in panels with Type 2 protection devices installed upstream. The residual voltage left downstream is less than for Type 1 or 2.
They should be installed as close as possible to the equipment being protected.
■Discharge capacity with an 8/20 μs waveform. Imax: 10 kA.
■Exclusive devices for TNS, TNC, TT , IT earthing systems.
■Exclusive devices which are compatible with Power Line Communication networks.
■Biconnect – two types of terminal: for rigid or flexible cable and for fork type comb busbar.
■Available with optional remote signalling.

Dimensions

Product detail pictures:

Related Product Guide:

To create more value for customers is our business philosophy; customer growing is our working chase for High Quality for Spd 24v Dc - wholesale 3 phase 10-20ka 385V SPD,overvoltage Power surge protection,lightning protection class II+III spd HS2-10 – HONI electric , The product will supply to all over the world, such as: Istanbul, Singapore, Mauritius, Our company's main products are widely used all over the world; 80% of our products exported to the United States, Japan, Europe and other markets. All stuff sincerely welcome guests come to visit our factory.

2 Pole T1/T2 Spd