Looking for Exclusive Agency and Distributor! Welcome Contact:0086-18966276297 0086-577-61718910

page_head_bg

HO212/214 10kA Residual current circuit breaker withovercurrent protection

This standard applies to our company produced HO212/214-63 residual current circuitbreaker with over current protection.The circuit breaker has good current limitingperformance, and can accurately protect the line from overload, short circuit, leakagecurrent and other fault hazards.HO212/214-63 series circuit breakers (hereinafter referred to as circuit breakers) aresuitable for AC 50/60Hz, rated voltage not exceeding 415V, rated current to 63A, toprotect line facilities and electrical equipment in buildings and similar places, and alsofor infrequent on-off operations.


Product Detail

Product Tags

>Scope of application

This standard applies to our company produced HO212/214-63 residual current circuitbreaker with over current protection.The circuit breaker has good current limitingperformance, and can accurately protect the line from overload, short circuit, leakagecurrent and other fault hazards.HO212/214-63 series circuit breakers (hereinafter referred to as circuit breakers) aresuitable for AC 50/50Hz, rated voltage not exceeding 415V, rated current to 63A, toprotect line facilities and electrical equipment in buildings and similar places, and alsofor infrequent on-off operations.

1.Short-circuit protection function

2.Overload protection function

3. Leakage protection function

4.Controlfunction

5.Isolation function

>Normal working conditions and installation conditions

Ambient temperature range -5 C ~+40C,Average temperature not exceeding +35 C in24H
Altitude The elevation of the installation site does not exceed 2000m
Atmospheric conditions +40*C,50%+20C,90%
Class of pollution level2
Installation condition TH35-7.5 steel mounting rail according to JB6525-1992
Installation site Install it vertically, with the handle facing upward to poweron
Other requirements for installation There should be no significant shock and vibration at theinstallation site.

>Parameters

Product model HO212 H0214
Standard IEC61009-1
Trip curve B,C,D
Rated current (In) 6,10,16,20,25,32,40,63 4
Rated voltage(Ue) 240V/415V
Insulation Voltage(Ui) 500V
Rated residual operating current (l△n) 30mA,100mA,300mA
Action characteristics of residual current Type-AC,type-A, type-S
Breaking capacity (lcn) 10kA
Rated operating short circuit breakingcapacity(lcs) 7.5kA
Rated impulse resistance voltage 4kY
Rated (residual) on/off capacity (1△m) 2000A
Disconnect indicator function The green indicator represents the contact open
Surge current resistance/at(8/20)us 3KA
Number of product poles Two poles( 2P), Four poles (4P)
Electric life 4000
Mechanical life 10000
Trip curve Curve B:Instant trip between 3In and 5lnCurve C:Instant trip between 5In and 10ln
Protection Degree IP20

>Storage conditions and requirements

Storage method Ventilation; Relative humidity does not exceed 80%6,; Noacid, alkaline and corrosive gases in the air
Storage temperature -25C-+70C
Storage time From the date of production, the products shall not bestored for more than 3 years under the above conditions
包装1
包装 4
A+S CB
A+S CE
A+S UKCA

  • Previous:
  • Next:

  • Write your message here and send it to us