Looking for Exclusive Agency and Distributor! Welcome Contact:0086-18966276297 0086-577-61718910
Features/Benefifits
Plug-in format
Data sheet
TypeTechnical DataMaximum continuous voltage (UC) (L-N) |
HS25-B60
275 / 320 / 385 / 420V |
Maximum continuous voltage (UC) (N-PE) |
275V |
SPD to EN 61643-11, SPD to IEC 61643-11 |
Type 1+2 , class I+II |
Lightning impulse current (10/350μs) (Iimp) |
12.5kA |
Nominal discharge current (8/20μs) (In) |
30kA |
Maximum discharge current (8/20μs) (Imax) |
60kA |
Voltage protection level (Up) (L-N) |
≤ 1.5 / 1.8 / 2.0 / 2.2kV |
Voltage protection level (Up) (N-PE) |
≤ 1.5kV |
Response time (tA) (L-N) |
< 25ns |
Response time (tA) (N-PE) |
< 100ns |
Thermal Protection |
YES |
Operating State/Fault Indication |
Green (good) / White or Red (replace) |
Degree of protection |
IP 20 |
Insulating material / flammability class |
PA66,UL94 V-0 |
Temperature range |
-40ºC~+80ºC |
Altitude |
13123 ft [4000m] |
Conductor Cross Section (max) |
35mm2 (Solid) / 25mm2 (Flexible) |
Remote Contacts (RC) |
Optional |
Format |
Pluggable |
For mounting on |
DIN rail 35mm |
Place of installation |
indoor installation |
Dimensions
1. product design standard: this product is designed according to relevant international standards IEC, and its performance meets the requirements of national standard GB 18802.1-2011 “low voltage surge protector (SPD) part 1: performance requirements and test methods of surge protector for low voltage distribution system”.
2. Scope of product use: GB50343-2012 Technical Code for Lightning Protection of Building Electronic Information System
3 Selection of surge protector: The primary SPD must be set in the main distribution box at the entrance of building power supply.
4. Product features: This product has the characteristics of low residual voltage, fast response speed, large current capacity (impulse current Iimp(10/350μs) is 25kA/ line, long service life, simple maintenance and convenient installation, etc.
5.Working temperature: -25℃ ~+70℃, working humidity: 95%.
Quality assurance:
1. Strict control on choose of the raw material sources.
2. Speciific technology guide for the production of each product.
3. Completed quality testing system for the semi-finished products and finised products.