New Fashion Design for Spd Dc 1100v 2p – HS2-I-50 Lightning Current Arresters – HONI electric

Send email to us

Product Detail

Product Tags

Feedback (2)

Adhering to your principle of "quality, assistance, performance and growth", we have now gained trusts and praises from domestic and international customer for 30ma Elcb, 2 Pole Spd 1000vdc, Saa Rcbo, With a wide range, top quality, reasonable rates and stylish designs, our products are extensively used with this industries and other industries.

New Fashion Design for Spd Dc 1100v 2p – HS2-I-50 Lightning Current Arresters – HONI electric Detail:

Features/Benefifits

Easy installation or retrofifit

Din-rail mountable

Fail-safe /self-protected design

IP20 fifinger-safe design

Small foot print

Plug-in format

HS210-I-50 is the most robust range of Type 1/Class I lightning current arresters, able to discharge energy (current) from a direct lightning strike (10/350) on an external lightning protection system (LPS) or overhead supplies, in accordance with EN/IEC 61643-11. DIN rail monobloc format.

■Suitable as a fifirst step of protection in incoming power supply panels and in areas of high atmospheric exposure.

■Discharges impulse currents with a 10/350 μs waveform: 50 kA per phase.

■Exclusive devices for TNS, TNC, TT , IT earthing systems.

■Exclusive devices which are compatible with Power Line Communication networks.

■Biconnect – two types of terminal: for rigid or flflexible cable and for fork type comb busbar.

Data sheet

TypeTechnical DataNominal line voltage (Un)	HS210-I-50 230/400 V (50/60Hz)
Maximum continuous voltage (UC) (L-N)	255V
Maximum continuous voltage (UC) (N-PE)	255V
SPD to EN 61643-11	Type 1
SPD to IEC 61643-11	class I
Lightning impulse current (10/350μs) (Iimp)	50kA
Nominal discharge current (8/20μs) (In)	50kA
Voltage protection level (Up) (L-N)	≤ 2.0kV
Voltage protection level (Up) (N-PE)	≤ 2.0kV
Response time (tA) (L-N)	< 100ns
Response time (tA) (N-PE)	< 100ns
Operating State/Fault Indication	no
Degree of protection	IP 20
Insulating material / ﬂammability class	PA66,UL94 V-0
Temperature range	-40ºC~+80ºC
Altitude	13123 ft [4000m]
Conductor Cross Section (max)	35mm2 (Solid) / 25mm2 (Flexible)
Remote Contacts (RC)	no
Format	Monobloc
For mounting on	DIN rail 35mm
Place of installation	indoor installation

Dimensions

●The power must be cut off before installation, and live operation is strictly prohibited
●It is recommended to connect a fuse or automatic circuit breaker in series at the front of the lightning protection module
●When installing, please connect according to the installation diagram. Among them, L1, L2, L3 are phase wires, N is the neutral wire, and PE is the ground wire. Do not connect it wrongly. After installation, close the automatic circuit breaker (fuse) switch
●After installation, check whether the lightning protection module is working properly 10350gs, discharge tube type, with window: during use, the fault display window should be checked and checked regularly. When the fault display window is red (or the remote signal terminal of the product with remote signal output alarm signal), it means the lightning protection module In the event of failure, it should be repaired or replaced in time.
●Parallel power supply lightning protection modules should be installed in parallel (Kevin wiring can also be used), or double wiring can be used. Generally, you only need to connect any one of the two wiring posts. The connecting wire must be firm, reliable, short, thick, and straight.

Product detail pictures:

Related Product Guide:

Sticking to the perception of "Creating products of top of the range and earning mates with people today from all over the world", we constantly put the desire of consumers in the first place for New Fashion Design for Spd Dc 1100v 2p – HS2-I-50 Lightning Current Arresters – HONI electric , The product will supply to all over the world, such as: Doha, Accra, Maldives, We only supply quality products and we believe this is the only way to keep business continue. We can supply custom service too such as Logo, custom size, or custom products etc that can according to customer's requirement.

2 Pole Spd 1000vdc 20-40

2p Solar System Spd Circuit Breaker

3 Pole Spd

4.5ka B C Spd

60ka Spd

Ac Spd 1p 40ka

Pad Spd 20

Pedal Dual Spspd 1000v

Spd Ac

Spd Sole

The company can keep up with the changes in this industry market, product updates fast and the price is cheap, this is our second cooperation, it's good.

By Diego from Jamaica - 2017.09.28 18:29

The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!

By Yannick Vergoz from Slovakia - 2018.06.18 19:26

Write your message here and send it to us