PriceList for Spd- 30 - HS2-I-15 Power Surge Protector – HONI electric

Send email to us

Product Detail

Product Tags

Feedback (2)

Adhering for the theory of "quality, services, performance and growth", we have received trusts and praises from domestic and worldwide shopper for Rcbo B16a, 60ka Spd, electromagnetic rcbo, Customers' benefit and satisfaction are always our biggest goal. Please contact us. Give us a chance, give you a surprise.

PriceList for Spd- 30 - HS2-I-15 Power Surge Protector – HONI electric Detail:

Features/Benefifits

Easy installation or retrofifit

Din-rail mountable

Fail-safe /self-protected design

Remote indicator (optional) with 3 pin NO/NC contact

IP20 fifinger-safe design

Visual indicator

Small foot print

Plug-in format

HS210-I-15 is the most robust range of Type 1/Class I lightning current arresters, able to discharge energy (current) from a direct lightning strike (10/350) on an external lightning protection system (LPS) or overhead supplies, in accordance with EN/IEC 61643-11. DIN rail monobloc format.

■Suitable as a fifirst step of protection in incoming power supply panels and in areas of high atmospheric exposure.

■Discharges impulse currents with a 10/350 μs waveform: 15 kA per phase.

■Exclusive devices for TNS, TNC, TT , IT earthing systems.

■Exclusive devices which are compatible with Power Line Communication networks.

■Biconnect – two types of terminal: for rigid or flflexible cable and for fork type comb busbar.

■Available with optional remote signalling.

Data sheet

Type Technical Data Maximum continuous voltage (UC) (L-N)	HS210-I-15 385 / 420V
Maximum continuous voltage (UC) (N-PE)	275V
SPD to EN 61643-11, IEC 61643-11	Type 1+2 , class I+II
Lightning impulse current (10/350μs) (Iimp)	15kA
Nominal discharge current (8/20μs) (In)	60kA
Maximum discharge current (8/20μs) (Imax)	100kA
Voltage protection level (Up) (L-N)	≤ 2.5kV
Voltage protection level (Up) (N-PE)	≤ 2.0kV
Response time (tA) (L-N)	< 25ns
Response time (tA) (N-PE)	< 100ns
Thermal Protection	YES
Operating State/Fault Indication	Red (replace)
Degree of protection	IP 20
Insulating material / ﬂammability class	PA66,UL94 V-0
Temperature range	-40ºC~+80ºC
Altitude	13123 ft [4000m]
Conductor Cross Section (max)	35mm2 (Solid) / 25mm2 (Flexible)
Remote Contacts (RC)	Optional
Format	Monobloc
For mounting on	DIN rail 35mm
Place of installation	indoor installation

Dimensions

Product detail pictures:

Related Product Guide:

Every single member from our higher effectiveness product sales staff values customers' requires and organization communication for PriceList for Spd- 30 - HS2-I-15 Power Surge Protector – HONI electric , The product will supply to all over the world, such as: Jordan, Lesotho, Burundi, Many products fully conform to the most rigorous of international guidelines and with our first-rate delivery service you will have them delivered at any time and in any place. And because Kayo deals in the entire spectrum of protective equipment, our customers don't need to waste time shopping around.

4.5ka B C Spd

400vdc Spd

Dc Spd

Pd Dongle

We have been appreciated the Chinese manufacturing, this time also did not let us disappoint,good job!

By Maud from Auckland - 2017.03.28 12:22

The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!

By Princess from Islamabad - 2018.07.27 12:26

Write your message here and send it to us