PriceList for Spd Solar - wholesale 4P AC SPD 10KA spd T2 T3 Phase lightning surge protector HS2-40 – HONI electric

Send email to us

Product Detail

Product Tags

Feedback (2)

We believe in: Innovation is our soul and spirit. Quality is our life. Shopper need is our God for Spd Rs 485, Ev Home Socket To Type 2 Charger, Spd Dc Mcb 600vdc, We are going to empower people by communicating and listening, Setting an example to others and learning from experience.

PriceList for Spd Solar - wholesale 4P AC SPD 10KA spd T2 T3 Phase lightning surge protector HS2-40 – HONI electric Detail:

Features/Benefifits

Easy installation or retrofifit

Din-rail mountable

Fail-safe /self-protected design

Remote indicator (optional) with 3 pin NO/NC contact

IP20 fifinger-safe design

Visual indicator

Small foot print

Plug-in format

HS25-C40 is the range of devices for discharging induced transient overvoltages (Type 2 / Class II), in accordance with EN/IEC 61643-11. DIN rail plug-in format.

Ability to discharge induced voltage surges (8/20 μs).

■Suitable for the second stage of protection in supply distribution panels in which

Type 1 protection devices are installed, or for the fifirst stage of protection in residential, commercial or other applications not exposed to direct strikes and with no external lightning protection system.

■Discharge capacity with an 8/20 μs waveform. Imax: 40 kA.

■Exclusive devices for TNS, TNC, TT , IT earthing systems.

■Exclusive devices which are compatible with Power Line Communication networks.

■Biconnect – two types of terminal: for rigid or flflexible cable and for fork type comb busbar.

■Available with optional remote signalling.

Data sheet

Type	HS25-C40
Technical Data Maximum continuous voltage (UC) (L-N)	275 / 320 / 385 / 420V
Maximum continuous voltage (UC) (N-PE)	275V
SPD to EN 61643-11	Type 2
SPD to IEC 61643-11	class II
Nominal discharge current (8/20μs) (In)	20kA
Maximum discharge current (8/20μs) (Imax)	40kA
Voltage protection level (Up) (L-N)	≤ 1.3 / 1.5 / 1.8 / 2.0kV
Voltage protection level (Up) (N-PE)	≤ 1.5kV
Response time (tA) (L-N)	< 25ns
Response time (tA) (N-PE)	< 100ns
Thermal Protection	YES
Operating State/Fault Indication	Green (good) / White or Red (replace)
Degree of protection	IP 20
Insulating material / ﬂammability class	PA66,UL94 V-0
Temperature range	-40ºC~+80ºC
Altitude	13123 ft [4000m]
Conductor Cross Section (max)	35mm2 (Solid) / 25mm2 (Flexible)
Remote Contacts (RC)	Optional
Format	Pluggable
For mounting on	DIN rail 35mm
Place of installation	indoor installation

Dimensions

The surge protection device spd 4p HS-C40 meet the type 2 requirement class according to IEC 61643-11. These devices protect low-voltage consumer systems from overvoltages of all types and are available in single-pole to four-pole versions. The use of high-performance varistors permits a rapid response time and a low protection level, without any line follow current. If circumstances are uncertain and there is a risk of fire from an overload, the internal cut-off unit disconnects the arrestor from the mains if necessary.

Risk of voltage surges

Electrical and electronic eauipment is indispensable in the daily activities of today’s businesses and individuals. Such devices are connected to the electricity grid, often exchanging data and signals through communication lines and are usually sensitive to disturbances. These interconnecting networks provide a propagation path for overvoltages.

Protection against lightning and overvoltages not only ensures the safety of people,goods and equipment, but also ensures continuity of installation services. Overvoltage protection extends the life of the equipment by more than 20%, which significantly reduces the volume of electronic waste. It also reduces the power consumption of the installations, all of which translates into cost savings and environmental sustainability.

OUR SERVICE:

1.quick response in before sales period help you got order.
2.excellent service in production time let you know each step we made.
3.reliable quality solve you after sale headache.
4.long period quality warranty ensure you can buy without hesitate.

Quality assurance:

1. Strict control on choose of the raw material sources.
2. Speciific technology guide for the production of each product.
3. Completed quality testing system for the semi-finished products and finised products.

To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.

Product detail pictures: